588CS19 NON-ASBESTOS

View detailed technical data, stock status, and sourcing information for: 588CS19 NON-ASBESTOS
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 588CS19 NON-ASBESTOS to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-401-5414

Item Name Code

17532

Assigment Date

12/17/1994 (31 years ago)

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

0.204 inches nominal diameter, round, unthreaded tongue hole type, 0.029 inches minimum and 0.035 inches maximum material thickness, 1.031 inches minimum and 1.091 inches maximum center to center distance between loop and mounting hole, 0.500 inches nominal overall width

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Tongue Hole Type: round, unthreaded
Overall Width: 0.500 inches nominal
Diameter: 0.204 inches nominal
Material Thickness: 0.029 inches minimum and 0.035 inches maximum
Center To Center Distance Between Loop And Mounting Hole: 1.031 inches minimum and 1.091 inches maximum
Distance From Loop Center To Tongue End: 1.249 inches minimum and 1.309 inches maximum
Loop Inside Diameter: 1.173 inches minimum and 1.203 inches maximum
Environmental Attribute Code: asbestos alternative products
Material: plastic cushion
Material: steel band
Material Document And Classification: qq-s-698 fed spec single material response band
Surface Treatment: cadmium band
Style Designator: single loop

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
5340-00-917-2555	No Name Available	07/01/1998

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
588CS19	Loop Clamp
588CS19 NON-ASBESTOS	Loop Clamp
JM44LC19S19AC	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-401-5414?

The FSCG of the NSN 5340-01-401-5414 is 5340

Does NSN 5340-01-401-5414 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-401-5414 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-401-5414 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-401-5414 was assigned to the Federal Catalog?

It was assigned 31 years ago, on Sat, Dec 17, 1994