5340-01-397-8095

Find complete technical information, availability, and procurement data for: 5340-01-397-8095
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-397-8095 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-397-8095

Item Name Code

17532

Assigment Date

10/20/1994 (31 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.6200 inches minimum and 0.6300 inches maximum overall width, thumb head screw fastening device type, 0.0500 inches nominal material thickness, 1.1250 inches nominal center to center distance between loop and mounting hole, 1.7200 inches minimum and 1.7800 inches maximum center to center distance between first and second holes

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Width: 0.6200 inches minimum and 0.6300 inches maximum
Material Thickness: 0.0500 inches nominal
Center To Center Distance Between First And Second Holes: 1.7200 inches minimum and 1.7800 inches maximum
Fastening Device Type: thumb head screw
Center To Center Distance Between Loop And Mounting Hole: 1.1250 inches nominal
Distance From Loop Center To Tongue End: 1.5350 inches nominal
Loop Inside Diameter: 1.1250 inches nominal
Lug Hole Diameter: 0.1990 inches minimum and 0.2090 inches maximum
Material: rubber butadiene nitrile cushion
Material: steel comp 321 band
Material Document And Classification: mil-s-6721 mil spec single material response band
Style Designator: clamp & bracket

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
TA103006B18NB02	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-397-8095?

The FSCG of the NSN 5340-01-397-8095 is 5340

Does NSN 5340-01-397-8095 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-397-8095 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-397-8095 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-397-8095 was assigned to the Federal Catalog?

It was assigned 31 years ago, on Thu, Oct 20, 1994