5340-01-377-1066

Find complete technical information, availability, and procurement data for: 5340-01-377-1066
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-377-1066 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-377-1066

Item Name Code

40223

Assigment Date

07/02/1993 (33 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

134.0 millimeters minimum and 136.0 millimeters maximum length, 17.2 millimeters minimum and 17.5 millimeters maximum all holes mounting hole diameter, unthreaded mounting hole type, 4 mounting hole quantity, 10.0 millimeters nominal thickness

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thickness: 10.0 millimeters nominal
Length: 134.0 millimeters minimum and 136.0 millimeters maximum
Mounting Hole Diameter: 17.2 millimeters minimum and 17.5 millimeters maximum all holes
Mounting Hole Quantity: 4
Mounting Hole Type: unthreaded
Special Features: one corner beveled; mounting configuration: 80.0 mm c to c along lg and 60.0 mm c to c along w
Material: steel
Material Document And Classification: astm a715, gr 60 assn std single material response
Surface Treatment: paint polyurethane
Shape: rectangular
Surface Treatment Document And Classification: mil-c-46168 mil spec 1st treatment response or mil-c-53039 mil spec 1st treatment response

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
12417908	Mounting Plate

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-377-1066?

The FSCG of the NSN 5340-01-377-1066 is 5340

Does the NSN 5340-01-377-1066 have a Schedule B code assigned?

Yes, the Schedule B code is 8710000090

Does NSN 5340-01-377-1066 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-377-1066 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-377-1066 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-377-1066 was assigned to the Federal Catalog?

It was assigned 33 years ago, on Fri, Jul 2, 1993