5340PL1672867

View detailed technical data, stock status, and sourcing information for: 5340PL1672867
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 5340PL1672867 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-278-2112

Item Name Code

17532

Assigment Date

05/03/1988 (38 years ago)

A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: for the letter h, both flanges of the h section are equal or longer than the width measured along the axis of the web; for the letter i, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters t and z, on nonferrous type, the web is usually at right angles to the flanges. Letter h section may have a maximum of 5 percent slope on the inside face of the flanges.

round, unthreaded tongue hole type, 0.199 inches minimum and 0.209 inches maximum diameter, weather resistant cushioning environmental protection, 0.020 inches minimum and 0.060 inches maximum material thickness, 0.490 inches minimum and 0.510 inches maximum overall width

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Tongue Hole Type: round, unthreaded
Cushioning Environmental Protection: weather resistant
Overall Width: 0.490 inches minimum and 0.510 inches maximum
Diameter: 0.199 inches minimum and 0.209 inches maximum
Material Thickness: 0.020 inches minimum and 0.060 inches maximum
Center To Center Distance Between Loop And Mounting Hole: 1.836 inches minimum and 1.866 inches maximum
Distance From Loop Center To Tongue End: 2.039 inches minimum and 2.099 inches maximum
Loop Inside Diameter: 2.735 inches minimum and 2.765 inches maximum
Material: rubber silicone class q cushion
Material: steel comp 321 band
Material Document And Classification: ams 3303 assn std single material response cushion
Material Document And Classification: mil-s-6721 mil spec single material response band
Surface Treatment: passivate band
Surface Treatment Document And Classification: qq-p-35 fed spec single treatment response band
Style Designator: offset mount

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
5340PL1672867	Loop Clamp
MS21919WCH44	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-278-2112?

The FSCG of the NSN 5340-01-278-2112 is 5340

Does the NSN 5340-01-278-2112 have a Schedule B code assigned?

Yes, the Schedule B code is 7326908695

Does NSN 5340-01-278-2112 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-278-2112 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-278-2112 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-278-2112 was assigned to the Federal Catalog?

It was assigned 38 years ago, on Tue, May 3, 1988