5340-01-213-8732

Find complete technical information, availability, and procurement data for: 5340-01-213-8732
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5340-01-213-8732 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-01-213-8732

Item Name Code

67806

Assigment Date

08/01/1985 (40 years ago)

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

0.367 inches minimum and 0.377 inches maximum hole diameter, 0.520 inches minimum and 0.540 inches maximum overall height, 0.690 inches minimum and 0.700 inches maximum shank diameter, 0.330 inches nominal shank length, 1.380 inches minimum and 1.400 inches maximum outside/top flange diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Shank Length: 0.330 inches nominal
Hole Diameter: 0.367 inches minimum and 0.377 inches maximum
Shank Diameter: 0.690 inches minimum and 0.700 inches maximum
Overall Height: 0.520 inches minimum and 0.540 inches maximum
Outside/Top Flange Diameter: 1.380 inches minimum and 1.400 inches maximum
Material: rubber
Material Document And Classification: general electric co, cage 07482, a12c36b16 mfr ref single material response

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
10112974	Bumper
7117M36P01	Bumper

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-01-213-8732?

The FSCG of the NSN 5340-01-213-8732 is 5340

Does the NSN 5340-01-213-8732 have a Schedule B code assigned?

Yes, the Schedule B code is 4006900000

Does NSN 5340-01-213-8732 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-01-213-8732 contain precious materials?

Item does not contain precious metal.

Does NSN 5340-01-213-8732 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-01-213-8732 was assigned to the Federal Catalog?

It was assigned 40 years ago, on Thu, Aug 1, 1985