126-0020-005

View detailed technical data, stock status, and sourcing information for: 126-0020-005
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 126-0020-005 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-842-2466

Item Name Code

20815

Assigment Date

01/01/1963 (63 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.433 inches nominal length, 0.016 inches nominal material thickness, 0.502 inches nominal overall height, 1.125 inches nominal width, 0.093 inches nominal hole diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.093 inches nominal
Width: 1.125 inches nominal
Overall Height: 0.502 inches nominal
Material Thickness: 0.016 inches nominal
Length: 0.433 inches nominal
Distance From Loop Center To End: 0.278 inches nominal
Loop/Holding Dimension: 0.400 inches nominal
Material: steel comp 1065 overall
Material Document And Classification: sae assn std single material response overall
Surface Treatment: tin overall

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
5340-00-850-3918	No Name Available	01/01/1962

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
108-200-8-8	Spring Tension Clip
126-0020-005	Spring Tension Clip
6002-48AT	Spring Tension Clip

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-842-2466?

The FSCG of the NSN 5340-00-842-2466 is 5340

Does the NSN 5340-00-842-2466 have a Schedule B code assigned?

Yes, the Schedule B code is 7326908630

Does NSN 5340-00-842-2466 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-00-842-2466 contain precious materials?

Precious metal content is unknown

Does NSN 5340-00-842-2466 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-842-2466 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Tue, Jan 1, 1963