214-1054-00

View detailed technical data, stock status, and sourcing information for: 214-1054-00
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 214-1054-00 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-480-3640

Item Name Code

20815

Assigment Date

06/14/1974 (52 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

steel comp 301 overall material, 0.795 inches minimum and 0.855 inches maximum length, 0.314 inches minimum and 0.330 inches maximum width, 0.014 inches minimum and 0.016 inches maximum material thickness, 80009 mfr ref single material response overall material document and classification

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Width: 0.314 inches minimum and 0.330 inches maximum
Material Thickness: 0.014 inches minimum and 0.016 inches maximum
Length: 0.795 inches minimum and 0.855 inches maximum
Material: steel comp 301 overall
Material Document And Classification: 80009 mfr ref single material response overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
214-1054-00	Spring Tension Clip

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-480-3640?

The FSCG of the NSN 5340-00-480-3640 is 5340

Does the NSN 5340-00-480-3640 have a Schedule B code assigned?

Yes, the Schedule B code is 7326908630

Does NSN 5340-00-480-3640 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-00-480-3640 contain precious materials?

Precious metal content is unknown

Does NSN 5340-00-480-3640 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-480-3640 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Fri, Jun 14, 1974