2500-4000-562

View detailed technical data, stock status, and sourcing information for: 2500-4000-562
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 2500-4000-562 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-475-8177

Item Name Code

03435

Assigment Date

06/09/1974 (52 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

4.578 inches nominal overall diameter, 4.005 inches minimum and 4.050 inches maximum center hole diameter, rubber synthetic overall material, 0.207 inches nominal base material thickness, 0.578 inches nominal overall length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Length: 0.578 inches nominal
Overall Diameter: 4.578 inches nominal
Center Hole Diameter: 4.005 inches minimum and 4.050 inches maximum
Base Material Thickness: 0.207 inches nominal
Material: rubber synthetic overall

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
2500-4000-562	Compression Cup
25004000-562 P4615	Compression Cup
461525004000-562	Compression Cup

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-475-8177?

The FSCG of the NSN 5340-00-475-8177 is 5340

Does NSN 5340-00-475-8177 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-00-475-8177 contain precious materials?

Precious metal content is unknown

Does NSN 5340-00-475-8177 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-475-8177 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Sun, Jun 9, 1974