5340PL0731727

View detailed technical data, stock status, and sourcing information for: 5340PL0731727
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 5340PL0731727 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5340 Commercial Hardware

National Stock Number

5340-00-382-8156

Item Name Code

17532

Assigment Date

03/21/1974 (52 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.484 inches minimum and 0.516 inches maximum overall width, 0.903 inches minimum and 0.913 inches maximum center to center distance between loop and mounting hole, 0.051 inches minimum and 0.054 inches maximum material thickness, round, unthreaded tongue hole type, 0.190 inches minimum and 0.192 inches maximum diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Tongue Hole Type: round, unthreaded
Overall Width: 0.484 inches minimum and 0.516 inches maximum
Diameter: 0.190 inches minimum and 0.192 inches maximum
Material Thickness: 0.051 inches minimum and 0.054 inches maximum
Center To Center Distance Between Loop And Mounting Hole: 0.903 inches minimum and 0.913 inches maximum
Distance From Loop Center To Tongue End: 1.116 inches minimum and 1.136 inches maximum
Loop Inside Diameter: 1.000 inches nominal
Material: steel comp 321 band
Material Document And Classification: ams 5510 assn std single material response band
Style Designator: single loop

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
2108637	Loop Clamp
5340PL0731727	Loop Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5340-00-382-8156?

The FSCG of the NSN 5340-00-382-8156 is 5340

Does the NSN 5340-00-382-8156 have a Schedule B code assigned?

Yes, the Schedule B code is 7326908695

Does NSN 5340-00-382-8156 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5340-00-382-8156 contain precious materials?

Precious metal content is unknown

Does NSN 5340-00-382-8156 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5340-00-382-8156 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Thu, Mar 21, 1974