S8330A14-160

View detailed technical data, stock status, and sourcing information for: S8330A14-160
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part S8330A14-160 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5970 Electrical Insulators and Insulating Materials

National Stock Number

5970-01-518-6250

Item Name Code

00867

Assigment Date

03/17/2004 (22 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.148 inches nominal inside diameter, not established reliability indicator, 16.000 inches nominal overall length, 0.045 inches maximum wall thickness, 8000.0 dielectric withstanding voltage in volts

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Wall Thickness: 0.045 inches maximum
Dielectric Withstanding Voltage In Volts: 8000.0
Reliability Indicator: not established
Inside Diameter: 0.148 inches nominal
Overall Length: 16.000 inches nominal
Temp Rating: -120.0 fahrenheit and 425.0 fahrenheit
Environmental Protection: mildew resistant
End Item Identification: hawkeye e-2c carrier
Design Form: full round
Flexibility: flexible
Color: natural
Material: glass fiber and rubber silicone class q
Style Designator: nonshrinkable

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
S8330A14-160	Electrical Insulation Sleeving
S9046-7-1-1600	Electrical Insulation Sleeving

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5970-01-518-6250?

The FSCG of the NSN 5970-01-518-6250 is 5970

Does the NSN 5970-01-518-6250 have a Schedule B code assigned?

Yes, the Schedule B code is 8546900000

Does NSN 5970-01-518-6250 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5970-01-518-6250 contain precious materials?

Item does not contain precious metal.

Does NSN 5970-01-518-6250 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5970-01-518-6250 was assigned to the Federal Catalog?

It was assigned 22 years ago, on Wed, Mar 17, 2004