17-1-5888-3

View detailed technical data, stock status, and sourcing information for: 17-1-5888-3
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 17-1-5888-3 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5970 Electrical Insulators and Insulating Materials

National Stock Number

5970-01-459-3854

Item Name Code

00867

Assigment Date

09/29/1998 (27 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2.000 inches nominal overall length, corrosion resistant and flame resistant and mildew resistant environmental protection, 0.187 inches nominal expanded inside diameter, not established reliability indicator, -55.0 celsius and 135.0 celsius temp rating

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Reliability Indicator: not established
Overall Length: 2.000 inches nominal
Temp Rating: -55.0 celsius and 135.0 celsius
Environmental Protection: corrosion resistant and flame resistant and mildew resistant
Expanded Inside Diameter: 0.187 inches nominal
Recovered Inside Diameter: 0.062 inches nominal
Design Form: full round
Minimum Tensile Strength: 1500 pounds per square inch
Special Features: the sleeves meet the mark permanence requirements of sae as81531 4.6.2 and mil-std-202g
Flexibility: flexible
Color: white
Material: plastic polyolefin
Style Designator: shrinkable
Dielectric Material Voltage Rating Per Unit Thickness: 500.0 volts per mil /0.001 inch/

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
5970-01-214-6550	No Name Available	06/01/2000

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
10652298-003	Electrical Insulation Sleeving
17-1-5888-3	Electrical Insulation Sleeving
9429451103	Electrical Insulation Sleeving
ECS6036D9	Electrical Insulation Sleeving
TMS-SCE-3/16-1.0	Electrical Insulation Sleeving
TMS-SCE-3/16-2.0-9	Electrical Insulation Sleeving

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5970-01-459-3854?

The FSCG of the NSN 5970-01-459-3854 is 5970

Does the NSN 5970-01-459-3854 have a Schedule B code assigned?

Yes, the Schedule B code is 8710000090

Does NSN 5970-01-459-3854 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5970-01-459-3854 contain precious materials?

Item does not contain precious metal.

Does NSN 5970-01-459-3854 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5970-01-459-3854 was assigned to the Federal Catalog?

It was assigned 27 years ago, on Tue, Sep 29, 1998