VITON16X2-5SH65

View detailed technical data, stock status, and sourcing information for: VITON16X2-5SH65
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part VITON16X2-5SH65 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5970 Electrical Insulators and Insulating Materials

National Stock Number

5970-01-133-8780

Item Name Code

00867

Assigment Date

06/22/1982 (44 years ago)

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

2.000 inches minimum expanded inside diameter, -40.0 celsius and 200.0 celsius temp rating, flame resistant and mildew resistant and water resistant environmental protection, not established reliability indicator, 1.000 inches maximum recovered inside diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Reliability Indicator: not established
Temp Rating: -40.0 celsius and 200.0 celsius
Environmental Protection: flame resistant and mildew resistant and water resistant
Expanded Inside Diameter: 2.000 inches minimum
Recovered Inside Diameter: 1.000 inches maximum
Recovered Wall Thickness: 0.050 inches minimum and 0.080 inches maximum
Heat Shrinkage Rating In Percent: 50.0
Minimum Tensile Strength: 1200 pounds per square inch
Flexibility: flexible
Color: black
Material: plastic
Style Designator: shrinkable
Dielectric Material Voltage Rating Per Unit Thickness: 200.0 volts per mil /0.001 inch/
Specification/Standard Data: 81349-mil-i-23053/13 government specification and 06090-rt-1146 manufacturers specification

Replaces National Stock Numbers

Below is a list of NSNs that have been officially superseded by this NSN:

NSN	Name	Date
5970-01-252-3323	No Name Available	08/01/2002

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
M25053/13-011-0	Electrical Insulation Sleeving
MIL-I-25053/13	Electrical Insulation Sleeving
RT-1146SIZE2	Electrical Insulation Sleeving
VITON-2-0-SP	Electrical Insulation Sleeving
VITON16X2-5SH65	Electrical Insulation Sleeving

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5970-01-133-8780?

The FSCG of the NSN 5970-01-133-8780 is 5970

Does the NSN 5970-01-133-8780 have a Schedule B code assigned?

Yes, the Schedule B code is 8546900000

Does NSN 5970-01-133-8780 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5970-01-133-8780 contain precious materials?

Item does not contain precious metal.

Does NSN 5970-01-133-8780 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5970-01-133-8780 was assigned to the Federal Catalog?

It was assigned 44 years ago, on Tue, Jun 22, 1982