10000234632 ITEM 7
View detailed technical data, stock status, and sourcing information for: 10000234632 ITEM 7
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 10000234632 ITEM 7 to receive an up to date pricing and availability quote by email.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.
single speed speed adjustments, 4.344 inches nominal overall width, driptight-nema type 2 hazardous locations/environmental protection, 9.062 inches nominal overall length, 10.344 inches nominal overall height
Product Characteristics
Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.
- Speed Adjustments
- single speed
- Hazardous Locations/Environmental Protection
- driptight-nema type 2
- Overall Length
- 9.062 inches nominal
- Overall Height
- 10.344 inches nominal
- Overall Width
- 4.344 inches nominal
- Ac Voltage Rating
- 600.0 volts maximum
- Frequency Rating
- 60.0 hertz nominal
- Actuation Method
- manual
- End Item Identification
- 3 phase motors
- Performance Type
- automatic
- Size Designator
- size 2
- Duty Cycle
- continuous
- Operating Voltage Characteristic
- full
- Actuator Voltage
- 120.0 ac
- Load Protection Type
- overload
- Ambient Temp
- -13.0 fahrenheit and 131.0 fahrenheit
- Enclosure Feature
- open
- National Electrical Manufacturers Association Standards Design
- designed per nema std
- Control Type
- remote
- Power Rating
- 20.0 horsepower
- Phase
- three
- Frequency In Hertz
- 60.0
- Precious Material And Location
- contacts silver
- Precious Material
- silver
Related Parts
This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:
| Part Number | Name |
|---|---|
| 10000234632 ITEM 7 | Motor Starter |
| 520E-COD-XXX | Motor Starter |
FAQs
Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.
What is the FSCG of the NSN 6110-01-624-7666?
Does the NSN 6110-01-624-7666 have a Schedule B code assigned?
Does NSN 6110-01-624-7666 require demilitarization?
Does NSN 6110-01-624-7666 contain precious materials?
Does NSN 6110-01-624-7666 contain hazardous materials?
When the NSN 6110-01-624-7666 was assigned to the Federal Catalog?
Professional Distribution
Certified to meet the strict requirements of defense, aerospace, and hazardous materials distribution.
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- AS9120 Quality Standards
- 100% Quality Inspections
You May Also Like
Browse other in-demand NSN parts sourced by professionals in defense, aerospace, and manufacturing sectors. Each component meets strict standards for quality and performance.
Pricing
Submit your request below and our team will respond quickly with up-to-date pricing, delivery estimates, and stock information:
