5935-01-504-4989

Find complete technical information, availability, and procurement data for: 5935-01-504-4989
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5935-01-504-4989 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5935 Electrical Connectors

National Stock Number

5935-01-504-4989

Item Name Code

23010

Assigment Date

01/30/2003 (23 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1055-01-329-6826, multiple launch rocket system end item identification, 1.880 inches nominal cable opening diameter, 0.199 inches minimum and 0.209 inches maximum unthreaded mounting hole diameter, 1 unthreaded hole mounting facility type and quantity, 1 cable opening quantity

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Unthreaded Mounting Hole Diameter: 0.199 inches minimum and 0.209 inches maximum
End Item Identification: 1055-01-329-6826, multiple launch rocket system
Cable Opening Diameter: 1.880 inches nominal
Cable Opening Quantity: 1
Mounting Facility Type And Quantity: 1 unthreaded hole
Special Features: open part of ring has a latch and a loop for locking down clamp
Material: steel corrosion resisting
Surface Treatment: passivate

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
13211537-143	Electrical Connector Cable Clamp

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5935-01-504-4989?

The FSCG of the NSN 5935-01-504-4989 is 5935

Does the NSN 5935-01-504-4989 have a Schedule B code assigned?

Yes, the Schedule B code is 8548900100

Does NSN 5935-01-504-4989 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5935-01-504-4989 contain precious materials?

Item does not contain precious metal.

Does NSN 5935-01-504-4989 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5935-01-504-4989 was assigned to the Federal Catalog?

It was assigned 23 years ago, on Thu, Jan 30, 2003