62828-90149-1

View detailed technical data, stock status, and sourcing information for: 62828-90149-1
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for part 62828-90149-1 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Electrical and Electronic Equipment Components

Federal Supply Classification

5935 Electrical Connectors

National Stock Number

5935-01-399-2558

Item Name Code

15091

Assigment Date

11/19/1994 (31 years ago)

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

2 mating end quantity, 2.200 inches maximum overall length, 0.900 inches nominal overall width, lock tab connector locking method, 0.160 inches nominal unthreaded mounting hole diameter

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Overall Length: 2.200 inches maximum
Overall Width: 0.900 inches nominal
Unthreaded Mounting Hole Diameter: 0.160 inches nominal
Mating End Quantity: 2
Connector Locking Method: lock tab
End Item Identification: automated surface observing system (asos)
Special Features: adapter shall be a filter/surge suppressor to perform emi and surge protection on telephone signals. the filter/suppressor shall operate with normal switched telephone signal levels. it must pass the ac ring voltage of approximately 170 vac as well as audio up to 4khz. there shall be 4 pins on each filter. all 4 pins shall be filtered and protected for surge. surge protection shall be shunted to case ground. current rating - load current 0.5 amperes per pin; operating voltage - 200 vac; dc resistance - 0.2 ohms or less. the input end of the housing shall have a rj-11 socket telephone connector and a mounting flange. the flange shall have two 4-40 screw inserts. the output end shall have a rj-11 connector. the pins shall be wired pin to pin

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
447642-1	Connector Adapter
62828-90149-1	Connector Adapter

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5935-01-399-2558?

The FSCG of the NSN 5935-01-399-2558 is 5935

Does the NSN 5935-01-399-2558 have a Schedule B code assigned?

Yes, the Schedule B code is 8548900100

Does NSN 5935-01-399-2558 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5935-01-399-2558 contain precious materials?

Item does not contain precious metal.

Does NSN 5935-01-399-2558 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5935-01-399-2558 was assigned to the Federal Catalog?

It was assigned 31 years ago, on Sat, Nov 19, 1994