5365-01-453-3101

Find complete technical information, availability, and procurement data for: 5365-01-453-3101
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5365-01-453-3101 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5365 Bushings, Rings, Shims and Spacers

National Stock Number

5365-01-453-3101

Item Name Code

26979

Assigment Date

02/25/1998 (28 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.560 inches nominal overall width, 3.000 inches nominal overall length, 0.342 inches minimum and 0.352 inches maximum hole diameter, 1.000 inches nominal overall thickness, 2.375 inches nominal center to center distance between bolt holes along length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Hole Diameter: 0.342 inches minimum and 0.352 inches maximum
Overall Length: 3.000 inches nominal
Overall Width: 0.560 inches nominal
Overall Thickness: 1.000 inches nominal
Center To Center Distance Between Bolt Holes Along Length: 2.375 inches nominal
Outside Edge To Bolt Hole Center Distance Along Length: 0.310 inches nominal
Bolt Hole Centerline To Nearest Edge Distance: 0.280 inches nominal
Bolt Hole Quantity: 2
Special Features: spacer has groove along one side of overall length; groove has nominal depth of 0.500 in., has nominal length of 1.740 in. and extends along entire width of spacer.
Material: aluminum alloy 5456
Material Document And Classification: qq-a-200/7 fed spec single material response
Style Designator: non-circular w/square corners

Related Parts

This NSN group includes multiple components designed to meet specific performance and operational standards. Each listing provides detailed specs, functionality data, and replacement compatibility information:

Part Number	Name
752-6406822-40	Plate Spacer
DF1706-412 FN 40	Plate Spacer

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5365-01-453-3101?

The FSCG of the NSN 5365-01-453-3101 is 5365

Does the NSN 5365-01-453-3101 have a Schedule B code assigned?

Yes, the Schedule B code is 7616995195

Does NSN 5365-01-453-3101 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5365-01-453-3101 contain precious materials?

Item does not contain precious metal.

Does NSN 5365-01-453-3101 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5365-01-453-3101 was assigned to the Federal Catalog?

It was assigned 28 years ago, on Wed, Feb 25, 1998