5306-00-727-9753

Find complete technical information, availability, and procurement data for: 5306-00-727-9753
DODParts.com distributes related products varnishes dopes paints, aircraft parts and consumables, electrical parts, fittings and other components for the aerospace and defense industries. Submit the short price quote form for NSN 5306-00-727-9753 to receive an up to date pricing and availability quote by email.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5306 Bolts

National Stock Number

5306-00-727-9753

Item Name Code

01853

Assigment Date

01/01/1963 (63 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.080 inches nominal shoulder thickness, 3a thread class, 0.250 inches minimum and 0.252 inches maximum eye inside diameter, right-hand thread direction, 0.750 inches maximum thread length

Product Characteristics

Below you’ll find the complete technical specifications and performance data for this part, including material details and compliance information.

Thread Class: 3a
Thread Direction: right-hand
Thread Length: 0.750 inches maximum
Eye Inside Diameter: 0.250 inches minimum and 0.252 inches maximum
Shoulder Thickness: 0.080 inches nominal
Shank Length: 1.750 inches nominal
Eye Stock Thickness: 0.480 inches nominal
Shoulder Diameter: 0.688 inches nominal
Overall Length: 2.525 inches nominal
Nominal Thread Diameter: 0.438 inches
Thread Quantity Per Inch: 20
Minimum Tensile Strength: 125000 pounds per square inch
Distance From Center Of Eye To Shank End: 2.181 inches nominal
Eye Outside Width: 0.688 inches nominal
Material: steel comp 8630 overall
Material Document And Classification: mil-s-6050 mil spec single material response overall
Style Designator: round, closed w/shoulder
Thread Series Designator: unf

FAQs

Find helpful answers about installation, operation, maintenance, compliance, and troubleshooting.

What is the FSCG of the NSN 5306-00-727-9753?

The FSCG of the NSN 5306-00-727-9753 is 5306

Does the NSN 5306-00-727-9753 have a Schedule B code assigned?

Yes, the Schedule B code is 7318152000

Does NSN 5306-00-727-9753 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5306-00-727-9753 contain precious materials?

Precious metal content is unknown

Does NSN 5306-00-727-9753 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 5306-00-727-9753 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Tue, Jan 1, 1963